Products > Positioning Solutions > Digital Indicators

 

Digital Position Indicator DE04

High functionality and an attractive design are two of the main features of this electronic direct display. It can be used whenever measurement and display of values are required directly on the adjusting spindle.


ADVANTAGE OVERVIEW

Features

  • large display (figure height 8 mm)
  • max. hollow shaft diam. 16
  • freely programmable via PC -> programming tool (accessory)
  • battery can be easily replaced
  • battery life 24 months
  • incremental measurement function, display of absolute value
  • easy mounting

more...

   
 

Digital Position Indicator DE09

Freely programmable electronic position indicator for recording absolute values (battery backup). As a consistent further development of the bestselling mechanical position indicator worldwide, the DA09S, it opens up even more variable areas of use.

Features
  • Resolution 0.01 mm, pitches up to 10 mm
  • Absolute display with arithm. sign for negative values
  • Possible angle display (resolution 0.5)
  • Incremental function (relative measurement)
  • Battery-operated (~ 6 years)
  • Through hollow shaft

more...

   
 

Digital Position Indicator DE10

High functionality and an attractive design are two of the main features of this electronic direct display. It can be used whenever measurement and dis-play of values are required directly on the adjusting spindle.


Features
  • large display (figure height 11.5 mm)
  • max. hollow shaft diam. 30
  • freely programmable via PC -> programming tool (accessory)
  • battery can be easily replaced
  • battery life 24 months
  • incremental measurement function, display of absolute value
  • easy mounting

more...

   
 

Digital Position Indicator AP04

Electronic position indicator with bus interface for target / position value and programming parameter transmission. Very compact size with through hollow shaft for easy mounting onto the machine spindle. AP04 is an absolute position indicator, ie. capturing movements made when power off.

Features
  • Compact size
  • Through hollow shaft, max. diam. 20mm
  • With integral interface RS485
  • Reset, incremantal measurement and offset via keyboard
  • Robust magnetic sensorics

Options

  • Integral interface CAN-Bus

more...

 

  
2009 Rajdeep Automation Pvt. Ltd.  

Designed by Webz Solutions