Anti-collision Device system
Imported TELCO Make PA10B5XX Photoelectric Amplifiers used for 2-Channels.
| Sensors |
|
| Channels | 2 (independent) |
| Amplifiers | 2× Telco PA10B5XX photoelectric amplifiers |
| Interference immunity | Modulated IR signal + mechanical filters |
Description
This system works on the principle of infrared light transmission and reception. There are 2 transmitter (LT) and 2 receiver (LR) sensors with two amplifiers (one used for Channel-1 and the other for Channel-2). The amplifier modulates and controls the signal so that there is no cross-talk or interference from external IR light sources, and a set of mechanical filters also stops external light from interfering. Built on imported Telco PA10B5XX photoelectric amplifiers.
More from Telco
LT / LR
Operation mode and max sensing range: · Thru-beam: Dependent on amplifier (up to 70m)…
View Details →
Telco — MPAE21
Operation mode and max sensing range · Thru-beam: 0-45 m…
View Details →
SM 8000
Operation mode and max sensing range: · >Thru-beam: 0-20 m…
View Details →
Telco — MPA81
Multiplexed amplifier for fiber optic sensors · Supports 8 sensor channels…
View Details →
Telco — PA10
Operation mode and max sensing range · Thru-beam: 0-60 m…
View Details →
Telco — PA11
Operation mode and max sensing range: · Thru-beam: 0-70 m…
View Details →
Telco — PAB
Operation mode and max sensing range: Thru-beam: 0-70 m · Diffuse proximity: 0-4 m,…
View Details →
Telco — MPA41
Multiplexed amplifier unit for fiber optic sensors. · Supports multiple sensor channels in one module.…
View Details →SM 3000
Max sensing range:Thru-beam: 1-15 m · Cable or plug connection…
View Details →SM 6000
Max sensing range: Thru-beam: 1-6 m · Cable or plug connection…
View Details →
Telco — Reflectors
Passive optical device for photoelectric sensors · Reflects light beam back to sensor for detection…
View Details →Need help choosing or configuring?
Ask AI about this product →