
SIKO GP04
Genuine SIKO product, supplied in India by Rajdeep Automation, the authorised SIKO distributor.
- Extremely resistant to external influences
- Solid or blind-hole hollow shaft, max. Ø 20 mm
- Adaptation to various measurement distances owing to a wide range of gear ratios
- Integrated slip clutch to protect the potentiometer
- Potentiometer, power or voltage output
- IP65 protection category
Description
Siko Geared potentiometer: With solid or blind hole shaft
Technical Specifications
Mechanical
| Protection category | IP65 |
| Shaft | aluminum,black-finished steel |
| Gear ratio | 0.2 … 256 |
| Speed | ≤500 rpm |
Electrical
| Temperature range | -20 … 80 °C |
| Operating voltage | 24 V DC |
Applications
- Position feedback on adjustment axes in harsh environments
- Gate and valve position measurement in plants
- Cam switch and analog output on crane and hoist axes
- Spindle position feedback on large machine adjustments
- Wide gear ratio range for long travel measurement
More from SIKO

MA504/1 Electronic Display
Display accuracy max. 10 μm · Repeat accuracy max. ±0.01 mm…
View Details →
SIKO DK02
Control knob with integrated position indicator · Side display (left or right)…
View Details →
SIKO DE10P
Freely programmable via keys on the device · Hollow shaft max. Ø 30 mm…
View Details →
SIKO MSK320R
Enhanced safety owing to independent output channels 2 magnetic sensors and 2 signal conditioners in one sensor head · Works with MB320/1 magnetic tape, MRI01 or MR320 magnetic ring, MBR320 magnetic tape ring…
View Details →
SIKO GP03
Solid shaft Ø 4 mm or Ø 6 mm · Adaptation to various measurement distances owing to a wide range of gear ratios…
View Details →
SIKO LE100
Repeat accuracy max. ±1 μm · Status LED display Works with MB100/1 magnetic tape…
View Details →
SIKO DA10
Designed for large diameters · Hollow shaft, max. Ø 30 mm…
View Details →
SIKO DA04
Hollow shaft, max. Ø 14 mm · Counter with 4 decades and fine reading Detent as an option…
View Details →
AP20 & AP20S
Integrated Industrial-Ethernet-Fieldbus · Backlit two-row LCD Display of target and actual value displays with integrated alignment Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option…
View Details →
SIKO DA09S
Most-used size in slim design · Hollow shaft, max. Ø 20 mm…
View Details →
SIKO MS500H
Compact design of sensor and connector · To be connected to AP10S or AP20S…
View Details →
SIKO MSA
To be connected to magnetic displays MA505 and MA561 · Max. resolution depends on downstream electronics unit…
View Details →Need help choosing or configuring?
Ask AI about this product →