
SIKO AG24
Genuine SIKO product, supplied in India by Rajdeep Automation, the authorised SIKO distributor.
- Stainless steel hollow shaft up to max. ø20 mm
- Feather key groove at ø14 mm "manual" traveling without control unit by means of operator keys
- Brushless 160 W, 24 V DC motor with long service life
- Integrated absolute position encoder on the output shaft
- Integrated positioning controller Integrated spring-operated brake (option)
- 2-line LCD for target and position value and operating keys
- Integrated Industrial-Ethernet-Fieldbus M12 component mounting technology
- Manual emergency adjustment with motor without brake
- Industry 4.0 ready
Description
Siko Positioning drive: Maximum nominal torque of 14 Nm of the new Positioning drive AG24 Fieldbus/IE is a real power pack for format adjustment
Technical Specifications
Mechanical
| Material Property | mechanical data | aluminum anodized, stainless steel |
| Protection category |
|
Electrical
| Supply Voltage | 24 V DC ±10 % |
| Rated current | 6 A ±5 % |
| Resolution | 1024 steps/revolution shaft |
Applications
- Automated format adjustment on packaging machines with 14 Nm torque
- Repositioning stops and guides on woodworking and panel saws
- Format changeover on printing and labelling machines
- Spindle adjustment on bottling and filling lines during changeover
- Fieldbus-controlled positioning of heavier adjustment axes
More from SIKO

MA504/1 Electronic Display
Display accuracy max. 10 μm · Repeat accuracy max. ±0.01 mm…
View Details →
SIKO DK02
Control knob with integrated position indicator · Side display (left or right)…
View Details →
SIKO DE10P
Freely programmable via keys on the device · Hollow shaft max. Ø 30 mm…
View Details →
SIKO MSK320R
Enhanced safety owing to independent output channels 2 magnetic sensors and 2 signal conditioners in one sensor head · Works with MB320/1 magnetic tape, MRI01 or MR320 magnetic ring, MBR320 magnetic tape ring…
View Details →
SIKO GP03
Solid shaft Ø 4 mm or Ø 6 mm · Adaptation to various measurement distances owing to a wide range of gear ratios…
View Details →
SIKO LE100
Repeat accuracy max. ±1 μm · Status LED display Works with MB100/1 magnetic tape…
View Details →
SIKO DA10
Designed for large diameters · Hollow shaft, max. Ø 30 mm…
View Details →
SIKO DA04
Hollow shaft, max. Ø 14 mm · Counter with 4 decades and fine reading Detent as an option…
View Details →
AP20 & AP20S
Integrated Industrial-Ethernet-Fieldbus · Backlit two-row LCD Display of target and actual value displays with integrated alignment Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option…
View Details →
SIKO DA09S
Most-used size in slim design · Hollow shaft, max. Ø 20 mm…
View Details →
SIKO MS500H
Compact design of sensor and connector · To be connected to AP10S or AP20S…
View Details →
SIKO MSA
To be connected to magnetic displays MA505 and MA561 · Max. resolution depends on downstream electronics unit…
View Details →Need help choosing or configuring?
Ask AI about this product →