
SIKO MA504/1 Electronic Display (MA504/1)
Genuine SIKO product, supplied in India by Rajdeep Automation, the authorised SIKO distributor.
- Display accuracy max. 10 μm
- Repeat accuracy max. ±0.01 mm
- Lowest-power LCD
- Metric or decimal-inch indication
- Incremental measurement and reset function
- Direct reference/offset value input
- Battery-buffered memory
- Battery operation
- MS500H sensor pluggable
Description
Siko: Electronic display / Measurement display MA504/1. Quasi-absolute, small mains-independent LCD display
Technical Specifications
Mechanical
| MATERIAL PROPERTIES | built-in housing, plastic |
| temperature range | 0 … 60 °C |
| Protection category | IP40 |
Electrical
| Operating voltage | 3VDC |
| Current consumption | ~150 µA |
Applications
- Position display for manual adjustment axes on machines
- Measuring travel on woodworking and saw stops
- Retrofitting digital readouts on manually adjusted machines
- Battery-powered position display without mains supply
- Displaying length or setting values on cutting machines
More from SIKO

SIKO DK02
Control knob with integrated position indicator · Side display (left or right)…
View Details →
SIKO DE10P
Freely programmable via keys on the device · Hollow shaft max. Ø 30 mm…
View Details →
SIKO MSK320R
Enhanced safety owing to independent output channels 2 magnetic sensors and 2 signal conditioners in one sensor head · Works with MB320/1 magnetic tape, MRI01 or MR320 magnetic ring, MBR320 magnetic tape ring…
View Details →
SIKO GP03
Solid shaft Ø 4 mm or Ø 6 mm · Adaptation to various measurement distances owing to a wide range of gear ratios…
View Details →
SIKO LE100
Repeat accuracy max. ±1 μm · Status LED display Works with MB100/1 magnetic tape…
View Details →
SIKO DA10
Designed for large diameters · Hollow shaft, max. Ø 30 mm…
View Details →
SIKO DA04
Hollow shaft, max. Ø 14 mm · Counter with 4 decades and fine reading Detent as an option…
View Details →
AP20 & AP20S
Integrated Industrial-Ethernet-Fieldbus · Backlit two-row LCD Display of target and actual value displays with integrated alignment Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option…
View Details →
SIKO DA09S
Most-used size in slim design · Hollow shaft, max. Ø 20 mm…
View Details →
SIKO MS500H
Compact design of sensor and connector · To be connected to AP10S or AP20S…
View Details →
SIKO MSA
To be connected to magnetic displays MA505 and MA561 · Max. resolution depends on downstream electronics unit…
View Details →
SIKO SGH10
Measuring range 0 … 1000 mm (39.37 inches) · Absolute measuring system…
View Details →Need help choosing or configuring?
Ask AI about this product →