
SIKO IK360
Genuine SIKO product, supplied in India by Rajdeep Automation, the authorised SIKO distributor.
- Single-axis or dual-axis variant
- 0 … 10 V or 4 … 20 mA interface
- CANopen interface
- IP66 and IP67 protection classes
- Easy three-point mounting
Description
Siko Inclinometer IK360 Absolute inclination sensor based on MEMS technology, accuracy ±0.1° Inclinometer IK360 The IK360 inclination sensor is an absolute inclination sensor for precise angle or inclination measurement based on MEMS technology. Thanks to the robust design up to IP6K9K and the integrated temperature compensation, the inclination sensor can also be used in applications with substantial external influences. The IK360 is available in single and two-axis versions and with a variety of interfaces.
Technical Specifications
Mechanical
| MATERIAL PROPERTIES | PBT fiber-reinforced |
| Temperature range | -40 … 85 °C |
| Protection category | IP66/IP67 |
Electrical
| Operating voltage | 10...30 V DC |
| Type of connection | 1x M12 connector (A-coded) |
Applications
- Precise tilt measurement on cranes and lifting platforms
- Levelling of construction and agricultural machinery
- Panel angle monitoring on solar tracker installations
- Two-axis inclination on mobile hydraulic equipment
- CANopen angle data on vehicle control systems
More from SIKO

MA504/1 Electronic Display
Display accuracy max. 10 μm · Repeat accuracy max. ±0.01 mm…
View Details →
SIKO DK02
Control knob with integrated position indicator · Side display (left or right)…
View Details →
SIKO DE10P
Freely programmable via keys on the device · Hollow shaft max. Ø 30 mm…
View Details →
SIKO MSK320R
Enhanced safety owing to independent output channels 2 magnetic sensors and 2 signal conditioners in one sensor head · Works with MB320/1 magnetic tape, MRI01 or MR320 magnetic ring, MBR320 magnetic tape ring…
View Details →
SIKO GP03
Solid shaft Ø 4 mm or Ø 6 mm · Adaptation to various measurement distances owing to a wide range of gear ratios…
View Details →
SIKO LE100
Repeat accuracy max. ±1 μm · Status LED display Works with MB100/1 magnetic tape…
View Details →
SIKO DA10
Designed for large diameters · Hollow shaft, max. Ø 30 mm…
View Details →
SIKO DA04
Hollow shaft, max. Ø 14 mm · Counter with 4 decades and fine reading Detent as an option…
View Details →
AP20 & AP20S
Integrated Industrial-Ethernet-Fieldbus · Backlit two-row LCD Display of target and actual value displays with integrated alignment Stainless-steel hollow shaft ø20 mm, up to ø25.4 mm as an option…
View Details →
SIKO DA09S
Most-used size in slim design · Hollow shaft, max. Ø 20 mm…
View Details →
SIKO MS500H
Compact design of sensor and connector · To be connected to AP10S or AP20S…
View Details →
SIKO MSA
To be connected to magnetic displays MA505 and MA561 · Max. resolution depends on downstream electronics unit…
View Details →Need help choosing or configuring?
Ask AI about this product →